One of the most common issues with the Jeep Wrangler vehicle is how often and easily the windshields get cracked or chipped. Since the Jeep Wranglers are built for harsh conditions and off-roading, the windshield cracking issue is quite normal. But how much does the Jeep Wrangler Windshield replacement cost?
Although the cost will vary depending on some core facts, one can still complete their windshield replacement from any professional workshop at approximately $175 up to $1099.20.
Now do not worry while wondering about the other facts involved in the windshield replacement cost estimation because, in today’s article, I will address and explain everything-
Jeep Wrangler Windshield Replacement Cost (Updated Price)
Before you plan or decide on replacing the existing windshield of your Jeep Wrangler, you need to have a precise overview of its estimated budget.
And I will be sharing every single detail of the Jeep Wrangler windshield replacement task to help you out –
Typically, the windshield or glass protector replacement price will stay within the range from $175 up to $1000, where the professional help or labor expense might hang between $210 and $230.
But remember some key factors such as the brand, model, and year of your vehicle as well as the damage location, type of material or glass used, and your preferred servicing location or center also influence the replacement cost to fluctuate.
For your better understanding, here I have highlighted some popular Jeep Wrangler models and their estimated Windshield replacement cost-
- 1995 Jeep Wrangler Windshield – ($175 up to $280).
- 2004 Jeep Wrangler Windshield – ($280.58 up to $319.53)
- 2010 Jeep Wrangler Windshield – ($195 up to $481.19)
- 2012 Jeep Wrangler Windshield With Logo – ($316.98 up to $538.10)
- 2013 Jeep Wrangler Windshield – ($179 up to $472.29).
- 2015 Jeep Wrangler Windshield With Logo – ($288.60 up to $529.15).
- 2016 Jeep Wrangler Driver/Passenger Front Door Glass – ($269.23 up to $274.53).
- 2018 Jeep Wrangler Windshield With Logo – ($544.19 up to $809.44).
- 2020 Jeep Wrangler Windshield – ($397.50 up to $624.78).
When Should You Replace Your Jeep Wrangler Windshield?
Since the windshields are responsible for ensuring the driver’s safety during any crash or collision, knowing when you should replace your Jeep Wrangler’s windshield is one of the vital considerations.
Especially figuring out the timing earlier is more important to minimize the risk of encountering any severe accident.
There are a few easy ways to get hints when you need to replace the windshield-
First, when your Jeep’s front or rear glass looks tempered, it is an obvious sign that your windshield needs attention and replacement because tempered glass cannot handle the force of an extreme break or turn during crashes. It will either shatter onto the floor or over the driver’s face.
Second, you might notice a small crack on your windshield glass, and this crack is a sign that you should replace the glass before the crack turns huge. Because if you leave this crack now, it will continue expanding across the entire Windshield surface, and soon, you will notice more cracks in there.
Third, you might also notice other forms of chipping or pitting on your glass, and even it can look like a little rock chip.
Above mentioned signs are the most obvious way of getting the hint that you should replace your windshield, so keep notes of those signs for the future.
Jeep Wrangler Windshield Installation Guide:
Once you have noticed any of the earlier mentioned signs and decided to replace the current windshield of your Jeep Wrangler, it’s time for gathering all the required tools-
Required Tools-
- New Windshield
- Windshield Removal Tool
- Heavy duty Caulk Gun
- Saw Horses
- Windshield Adhesive & Primer
- Gasket Adhesive
Note: The procedures might look easier to do by yourself but remember unless you are really well experienced with such tasks and have enough confidence, it’s better to either contact your service provider or a professional machinic.
Now, it’s time for starting the job step by step-
Step 1 – You need to take the existing windshield frame off your Jeep Wrangler, and for that, you can clamp down the frame with the help of some sturdy sawhorses.
But while you are digging up the adhesive to break the bond with sawhorses, make sure you do not dig onto the frame or scratch it.
Step 2 – Once you have successfully finished breaking the edge of the glass away from the sealant and removed the old gasket, clean up all the leftover gunk or rusts.
Step 3 – Next, put a thin layer of new windshield adhesive on the fairly cleaned surface.
But if you have to clean up all the extra rusts, you will need an automotive primer too to spray after cleaning. Let the primer or adhesive dry first.
Step 4 – Now bring out your new windshield and gasket to install them in the old one’s place. First put on a thin layer of gasket adhesive and then, install the inner gasket.
The gasket adhesive will help grab or hold the inner gasket in place better.
Step 5 – After that, you will need a helping hand to safely take the new windshield glass and put it in place. First, put the windshield adhesive primer over there and let it dry properly. Then secure the new windshield glass in place.
Make sure the new glass is sitting in the right place comfortably and fits into your old frame perfectly.
Step 6 – Next, put on the new outer gasket across your new windshield carefully and securely.
Make sure the gap is even all the way around while installing the outer gasket.
Now, your Jeep Wrangler is restored with brand new windshield and ready for next adventure.
How To Prevent My Jeep Wrangler Windshield from Cracking?
Remember replacing the old cracked or damaged windshield of your Jeep Wrangler will never ensure you that the new one will not crack, no matter how expensive or high-end the new windshield is.
But following some easy tricks will surely prevent the windshield cracking issue for a while. Such as-
Avoid taking the highly trafficked or busy highways while driving, and in some cases taking the long shortcuts helps avoid busy roads.
While driving on the highly crowded or trafficked highways (only if you do not have any other way out), keep your safe distance from other vehicles. In that, you might fall behind sometimes, but trust me it will keep your windshield safe from encountering any sudden force.
Since windshields tend to get affected when rocks or debris hits them on the way, the best way to avoid this occurrence will be to keep a safe distance from the large vehicles that spin up debris.
Also going slow in such conditions will minimize the chances of a flying rock hitting your windshield glass.
Besides that, you should also avoid the gravel to prevent windshield damages.
Conclusion
To ensure better driver’s safety and avoid encountering any severe accident during crashes, you should always keep an eye on your Jeep’s windshield to find out any sign of potential issues.
And as soon you find a tiny issue on your windshield, make sure to contact your nearest servicing center for assistance.
Related Posts:
